C11000 铜管
铜管由纯净的电解铜制成。它们尺寸精确,表面光滑。此外,它们还具有良好的导热性。 因此,铜管被广泛用于热交换器、
电解槽和电容器。
联系我们
产品描述
产品展示
厂房
产品包装
C11000 铜管

-产品描述

材质

ASTM :铜 (C10200,C11000,C10100,C10200,C12000,)C11600,     黄铜(C21000,C22000,C23000,C24000,C26000,C27000,C27200,C27400,C2800,

C31400,C33000,C35600,C37100,C36000,C35300,C37100,C37700,C37710,C37000,C68700,C41100,C44300,C46200.

C46400,C26130,C65600,)     青铜(C50500,C51100,C52100,C60800,C61000,C61900,C63010,C62300,C63000,C63280,

C63020,C17200,C17000,C17500,C17510,C18200,C18100,C18200,C16200,C19400,C14500)       白铜(C70400,C71000,C71300,C71500,C70400,C70600,C75200,C77000,C75400,C79000,C79200) 

管道形状圆形、正方形、长方形
管道规格圆形管壁厚:0.2mm-120mm外径:2mm-910mm方形管壁厚:0.2mm-120m
m外径:2mmX2mm-1016mmX1016mm矩形管壁厚:0.2mm-900mm外径:2mmX4mm-1016mmX1219mm 
管道长度单随机、双随机&;所需长度
硬度1/16 硬度、1/8 硬度、3/8 硬度、1/4 硬度、1/2 硬度、全硬度、软硬度等
表面处理轧制,抛光,光亮,涂油,发纹,拉丝,镜面,喷砂,或按要求
应用本铜管采用纯电解铜制造,尺寸精确、表面光洁,并具有优良导热性能,广泛应用于换热器、
散热器、冷却器、电热管、空调及制冷设备。
直管可用于输油管、刹车管、建筑用水管及燃气管路。
包装出口 标准 包装: 捆扎木箱 或 按要求

;集装箱 内部尺寸 如下:(1)20 英尺 普柜: 5.8m(长)x 2.13m(宽)x 2.18m(高) 约 24-26 立方米

(2)40 英尺 普柜: 11.8m(长)x 2.13m(宽)x 2.72m(高)约 68 立方米包装将 达到 出口标准。或 按客户要求。 

此外,我们将对产品表面进行良好防护。

一、铜管化学成分(ASTM标准)




牌号铜(Cu)氧(O)其他元素备注




C10100 ≥99.99% ≤0.0005% 银(Ag) ≤0.0015%,超低杂质 高纯度无氧铜,用于高真空/低温环境

C10200 ≥99.95% ≤0.001% 总杂质 ≤0.03% 无氧铜(OFHC),通用高导电应用

C11000 ≥99.90% ≤0.02% 无磷脱氧 电解韧铜(ETP),常见导电体

C12200≥99.9% ≤0.015% 磷(P) 0.015-0.040% 磷脱氧铜(DHP),优异焊接性

关键差异:

氧含量: C10100氧含量最低(≤0.0005%)以避免氢脆;C12200采用磷脱氧增强焊接性。

杂质控制: C10100/C10200对银、硫等杂质限制更严格以确保高纯度。




二、机械性能对比(典型值)




牌号状态抗拉强度(MPa)屈服强度(MPa)延伸率(%)硬度(HV)




C10100 退火 200-250 70-100 ≥40 40-60

C10200 退火 200-240 60-90 ≥45 35-55

C11000 退火 210-260 80-110 ≥35 45-65

C12200退火 220-270 90-120 ≥30 50-70

备注:

冷加工(硬态):显著提高强度但降低塑性(如C10100硬态延伸率仅10-15%)。

C12200:因磷含量退火强度略高于C10100/C10200,但导电性较低。


C11000 铜管

—产品展示

下载.jpg

C11000 铜管

-厂房

C11000 铜管

-产品包装

BAOWU Metal
BAOWU Metal as a specialist in various steel products, we supply and sell silicon steel, carbon steel, galvanized steel and more. All products get corresponding certifications. We are committed to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction.
Our company is located in Wuxi City, Jiangsu Province, which is the largest steel processing center in China. Our teams specialized in the industry for over 14 years with rich experience in different silicon steel projects, and are familiar with variety of silicon steel standards, such as CE, SGS and so on. We can design and customize for unique requirements, and assure the safety, efficiency and reasonable price. Progressively we have expanded and now have five purpose built distribution warehouses and specialist steel process facilities offering services to the mining, construction, engineering and general fabrication industries around World.

立即获取免费报价!

提交